Dipole Construction
Displaying 1-3 of 3
| Jan 9th 2013, 16:36 | |
K0SCOTotal Topics: 0 Total Posts: 0 |
I am planning on building a six meter dipole out of aluminum tubing. One thing I haven't found out is the spacing between the two halves of the dipole. Does it matter? |
| Jan 9th 2013, 17:58 | |
W1VTSuper Moderator Total Topics: 0 Total Posts: 0 |
Not really. You do want to separate them far enough apart so that they don't short together in the wind. Zack Lau W1VT ARRL Senior Lab Engineer |
| Jan 10th 2013, 02:21 | |
K0SCOTotal Topics: 0 Total Posts: 0 |
Thanks Zack. I figured if it was very critical I would have read it somewhere. |
Displaying 1-3 of 3
