‰  NOW 20 WPM  ‰  TEXT IS FROM SEPTEMBER 2017 QST  PAGE 39‰

ASSEMBLY INSIDE THE BOX AND MARK THE CENTER OF THE COIL.  TAKE OUT THE GRID
ASSEMBLY, AND DRILL A HOLE FOR THE 8 32 GROUND TERMINAL.  PUT THE GRID
ASSEMBLY BACK IN THE NEMA BOX AND PLACE THE 1 4 UNUN ON THE RIGHT SIDE OF
THE BOX, THEN MARK AND DRILL A MOUNTING HOLE.  SECURE THE UNUN TO THE BOX
WITH A 6 32 STAINLESS STEEL SCREW AND A SMALL PIECE OF SCRAP CIRCUIT BOARD
OR STIFF PLASTIC.  TAKE A SOCKET THAT FITS THE MOUNTING NUTS OF THE RELAYS
AND USE A PENCIL TO TRACE THE EDGE OF THE SOCKET ON THE INSIDE TOP OF THE
RELAY MINI BOX, EQUALIZING ANY OVERLAP.  THIS WILL ENSURE THAT YOU WILL
HAVE ENOUGH SPACE TO TIGHTEN THE NUTS OF THE RELAYS.  USING YOUR STEP DRILL
BIT, DRILL THE MOUNTING HOLES FOR THE RELAYS IN THE TOP OF THE MINI BOX.
BOLT IN THE VACUUM RELAYS LOOSELY, POSITION THE TERMINAL STRIP FOR THE
‰  END OF 20 WPM TEXT  ‰  QST DE W1AW  ƒ