‰  NOW 15 WPM  ‰  TEXT IS FROM JULY 2015 QST  PAGE 35  ‰

THE FEED POINT TRANSFORMER AND TERMINATION RESISTOR BOXES SO THAT THE BOXES
SAT AT THE MIDPOINTS OF THE 14 FOOT VERTICAL SECTIONS.  THE SPREADER
LENGTHS WILL LIKELY BE SLIGHTLY LONGER THAN THE 16 FEET 1 INCH MEASURED
FROM THE CENTER OF THE SPREADER TO MAST PLATE.  ITS IMPORTANT TO ADJUST ALL
OF THE SPREADERS FOR AN OVERALL RECTANGULAR LOOP SHAPE, BUT WITHOUT
EXCESSIVE STRESS ON THE SIDE AND BOTTOM WIRES.  I SECURED EACH SECTION WITH
A SCREW AND LOCKNUT, USING PLASTIC CAPS TO SEAL THE ENDS OF THE UPPER
‰  END OF 15 WPM TEXT  ‚