‰  NOW 15 WPM  ‰  TEXT IS FROM MARCH 2014 QST  PAGE 60  ‰

CONTACT WITH THE ALUMINUM SHELL.  EVENTUALLY, THE PRESSURE OF THE SPRING
BREAKS THESE SOLDER POINTS.  I REMOVED THE BATTERIES AND THEN DROVE THE
WHOLE CIRCUIT BOARD/LENS ASSEMBLY OUT USING A 1/2 INCH NUT DRIVER.  THE
POSITIVE CONTACT SPRING FITS IN THE HOLLOW OF THE NUT DRIVER SO THE SPRING
ISNT DAMAGED.  USING A BIT OF SCRAP HOOKUP WIRE, I STRIPPED OFF ABOUT 1/2
INCH OF THE INSULATION AND SEPARATED THE STRANDS.  I SOLDERED ONE STRAND OF
WIRE TO EACH OF THE FOUR GROUND SOLDER POINTS, THEN CLIPPED OFF THE BIGGER
‰  END OF 15 WPM TEXT  ‚